Halo360
Clean cartridge filters faster, deeper, and with up to 150 gallons less water.
The professional-grade pool filter cartridge cleaning tool. Forged stainless steel, six custom-engineered nozzles, garden-hose connected.
Halo360
$599USD
A hose nozzle costs a few dollars because it is a few dollars of plastic. The Halo360 is forged stainless steel with no plastic anywhere in the water path.
Pay over time with Affirm or Klarna, available at checkout, subject to approval.
Your rate and terms are set by Affirm or Klarna and may vary.
Order the Halo360
Send your order request. We will reply by email from orders@halo360pro.com to confirm availability, shipping to your address, and secure payment. Nothing is charged until you approve. Direct from the maker; shipping within the United States.
The Halo360 runs on a standard garden hose spigot at 40 to 110 psi. Check yours in a minute. If it comes in below 40 psi, an inline booster pump lifts it into range.
Before you order
The ring is 17 inches across and goes around pool filter cartridges up to 12 inches in diameter. Measure your cartridge at its widest point. It works on cartridge filters, connected to a standard garden hose spigot.
Measurements
Will it fit your filters?
The ring is 17 inches across and goes around pool filter cartridges up to 12 inches in diameter. Measure your cartridge at its widest point.
- Ring diameter
- 17 inches
- Fits cartridges
- Up to 12 inches in diameter
- Water pressure
- 40 to 110 psi (static)
- Hose
- 5/8 in or 3/4 in, up to 50 ft
- Connection
- Standard garden hose spigot
- Build
- Forged stainless steel, no plastic parts
Specifications
Built to a professional standard
- Build
- Solid forged stainless steel. No plastic parts.
- Nozzles
- Six custom-engineered nozzles, focused 25-degree fan spray
- Connection
- Standard garden hose spigot
- Operating pressure
- 40 to 110 psi (static)
- Hose
- 5/8 in or 3/4 in, up to 50 ft
- Cleaning result
- Deeper and faster than the traditional method
- Water saved
- Up to 150 gallons per filter vs hand-cleaning with a hose
- Included
- On/off ball valve and pressure gauge assembly
- Warranty
- Limited warranty, doubles to 2 years with registration
- Made in
- the USA
- Ships to
- United States
Why it wins
Everything the Halo360 does better
Survives the back of the truck
Solid forged stainless steel through and through. No plastic, no weak points, no compromise. Built for years of daily professional use.
Saves up to 150 gallons per filter
A hand clean runs the hose the whole time. The Halo360 works in under two minutes and its integrated ball valve means water only runs when you need it, so a deeper clean uses up to 150 gallons less water.
Cleans deep into the pleats
Six custom-engineered nozzles tune both water force and droplet size. They drive a focused 25-degree fan spray to the base of the filter pleats. It blasts out packed-in dirt and debris without damaging the filter.
Keeps you upright, cuts fatigue
An integrated on/off ball valve gives you instant control and a pressure gauge shows your water pressure at a glance. The ergonomic design keeps you working all day.
More stops, not more hours.
Filter cleans are billable. A faster clean is time back in the day. Solid forged stainless steel, built to run a route for years.
Watch it work
See the six nozzles in action
Halo360 in action
Close-up footage of the Halo360 cleaning cartridge filters: the six custom-engineered nozzles clearing debris from deep in the pleats, and the integrated valve and pressure gauge in use.
- Build
- Solid forged stainless steel. No plastic parts.
- Nozzles
- Six custom-engineered nozzles, focused 25-degree fan spray
- Connection
- Standard garden hose spigot
- Operating pressure
- 40 to 110 psi (static)
- Hose
- 5/8 in or 3/4 in, up to 50 ft
- Cleaning result
- Deeper and faster than the traditional method
Recognition
Trusted where it counts
Recognized by the industry
Named to the Pool & Spa News 2026 Top 50 Products list. The Halo360 is in active professional use by pool pros, and we publish real, attributable reviews only.
About our reviewsQuestions
Halo360 FAQ
A minimum static pressure of 40 psi and a maximum of 110 psi, connected to a standard garden hose spigot. Within that range the six nozzles do the work.
Who makes it
Invented by a pool professional
The Halo360 was invented by a working pool professional, who holds the patent on the tool. It is built in Arizona and sold direct by Halo Pool Products, with no reseller in between.
This is not a catalogue tool with a logo on it. It comes from someone who cleans filters.